EPSolar/EPEVER VS1024BN
ViewStar series solar controller is our new generation controller for off-grid solar system, such as street light, solar home system or small power station etc
ViewStar series solar controller is our new generation controller for off-grid solar system, such as street light, solar home system or small power station etc
SPECIFICATIONS:
Model VS1024BN
Nominal system voltage 12V/24V auto work
Rated battery current 10A
Rated load current 10A
Max. battery voltage 32V
Equalize charging voltage Sealed: 14.6V, Flooded: 14.8V, User-defined: 9~17V
Boost charging voltage Gel: 14.2V, Sealed: 14.4V, Flooded: 14.6V, User-defined: 9~17V
Float charging voltage Gel /Sealed /Flooded: 13.8V, User-defined: 9~17V
Low voltage reconnect voltage Gel /Sealed /Flooded: 12.6V, User-defined: 9~17V
Low voltage disconnect voltage Gel /Sealed /Flooded 11.1V, User-defined: 9~17V
Self-consumption ≤15mA(12V); ≤10mA(24V); ≤9mA(36V); ≤8mA(48V)
Grounding Common negative
Temp. compensation -3mV/℃/2V
Relative humidity 10%~90% Non-condensation
Communication RS485 / RJ45 interface
LCD temperature -20℃ ~ +70℃
Working temperature -25℃ ~ +55℃
Humidity ≤95% N.C.
Enclosure IP30
Overall dimension 162x85x40mm
Terminals 4mm
Net weight 0.2kg
Model VS1024BN
Nominal system voltage 12V/24V auto work
Rated battery current 10A
Rated load current 10A
Max. battery voltage 32V
Equalize charging voltage Sealed: 14.6V, Flooded: 14.8V, User-defined: 9~17V
Boost charging voltage Gel: 14.2V, Sealed: 14.4V, Flooded: 14.6V, User-defined: 9~17V
Float charging voltage Gel /Sealed /Flooded: 13.8V, User-defined: 9~17V
Low voltage reconnect voltage Gel /Sealed /Flooded: 12.6V, User-defined: 9~17V
Low voltage disconnect voltage Gel /Sealed /Flooded 11.1V, User-defined: 9~17V
Self-consumption ≤15mA(12V); ≤10mA(24V); ≤9mA(36V); ≤8mA(48V)
Grounding Common negative
Temp. compensation -3mV/℃/2V
Relative humidity 10%~90% Non-condensation
Communication RS485 / RJ45 interface
LCD temperature -20℃ ~ +70℃
Working temperature -25℃ ~ +55℃
Humidity ≤95% N.C.
Enclosure IP30
Overall dimension 162x85x40mm
Terminals 4mm
Net weight 0.2kg
MT50
MT50 is an optional remote meter to monitor and program EPsolar controller,
Compatible with: LS-B, LS-BP,VS-BN, Tracer-BN,Tracer-A, eTracer, iTracer.
MT50 is an optional remote meter to monitor and program EPsolar controller,
Compatible with: LS-B, LS-BP,VS-BN, Tracer-BN,Tracer-A, eTracer, iTracer.
SPECIFICATION:
______________________________________________________________________________________________________________________
Self-consumption Backlight and acoustic alarm on<65mA
Backlight on<23mA
Backlight off <15mA
________________________________________________________________________________________________________________________________________
Faceplate dimensions 98×98 mm / 3.86×3.86 in
________________________________________________________________________________________________________________________________________
Frame dimensions 114×114 mm / 4.49×4.49 in
________________________________________________________________________________________________________________________________________
Connector type RJ45
________________________________________________________________________________________________________________________________________
Meter cable Standard 2m, max .50m
________________________________________________________________________________________________________________________________________
Meter weight 0.190 Kg
________________________________________________________________________________________________________________________________________
Ambient Temperature -20℃~+70℃/-4℉~158℉
________________________________________________________________________________________________________________________________________
______________________________________________________________________________________________________________________
Self-consumption Backlight and acoustic alarm on<65mA
Backlight on<23mA
Backlight off <15mA
________________________________________________________________________________________________________________________________________
Faceplate dimensions 98×98 mm / 3.86×3.86 in
________________________________________________________________________________________________________________________________________
Frame dimensions 114×114 mm / 4.49×4.49 in
________________________________________________________________________________________________________________________________________
Connector type RJ45
________________________________________________________________________________________________________________________________________
Meter cable Standard 2m, max .50m
________________________________________________________________________________________________________________________________________
Meter weight 0.190 Kg
________________________________________________________________________________________________________________________________________
Ambient Temperature -20℃~+70℃/-4℉~158℉
________________________________________________________________________________________________________________________________________

The Renogy Adventurer-30A PWM Flush MOunt Charge Controller with LCD Display
The Renogy Adventurer is a 30A PWM solar power charge controller that is designed to be used with photovoltaic systems. This advanced negative-ground controller is designed for aesthetically clean flush mounting on RV or camper walls. Integrating highly efficient PWM charging, the Adventurer increases battery longevity by regulating the charge flowing from the solar panels to the battery bank. It features an LCD screen for displaying system operation information and data, and allows for full control of parameter settings. This charge controller comes equipped with a fully comprehensive self-diagnostic system and electronic protection functions to prevent damage from installation mistakes or system faults.
SPECIFICATIONS
Nominal Voltage: 12 VDC Rated Charge Current: 30A
Max. PV Input Voltage: 25 VDC Equalization Voltage: Sealed: 14.6 V; Gel: None; Flooded: 14.8 V
Boost Voltage: Sealed: 14.4 V; Gel: 14.2 V; Flooded: 14.6 V Float Voltage: 13.8 V
Under Voltage: 12 V Self-consumption: ≤13mA
Temperature Compensation Coefficient: -3mV/°C/2V Operating Temperature: -13°F to 131°F
Storage Temperature: -31°F to 176°F Enclosure: IP20
Terminals: Up to 4 AWG Dimensions: 6.56 x 4.50 x 1.90 inches
The Renogy Wanderer-30A PWM Charge controller
The Renogy Wanderer is a 30A PWM solar power charge controller. This advanced negative-ground controller is designed for off-grid solar applications and can be used with a 12V battery or battery bank. Integrating highly efficient PWM charging, the Wanderer increases battery life and improves system performance. The controller comes equipped with fully comprehensive self-diagnostics and electronic protection functions to prevent damage from installation mistakes or system faults.
Nominal Voltage: 12 VDC Rated Charge Current: 30A
Max. PV Input Voltage: 25 VDC Equalization Voltage: Sealed: 14.6 V; Gel: None; Flooded: 14.8 V
Boost Voltage: Sealed: 14.4 V; Gel: 14.2 V; Flooded: 14.6 V Float Voltage: 13.8 V
Under Voltage: 12 V Self-consumption: ≤13mA
Temperature Compensation Coefficient: -3mV/°C/2V Operating Temperature: -13°F to 131°F
Storage Temperature: -31°F to 176°F Enclosure: IP20
Terminals: Up to 4 AWG Dimensions: 6.56 x 4.50 x 1.90 inches
The Renogy Wanderer-30A PWM Charge controller
The Renogy Wanderer is a 30A PWM solar power charge controller. This advanced negative-ground controller is designed for off-grid solar applications and can be used with a 12V battery or battery bank. Integrating highly efficient PWM charging, the Wanderer increases battery life and improves system performance. The controller comes equipped with fully comprehensive self-diagnostics and electronic protection functions to prevent damage from installation mistakes or system faults.
SPECIFICATIONS
Nominal Voltage: 12 VDC Rated Charge Current: 30A
Max. PV Input Voltage: 25 VDC Self-Consumption: <10mA
High Voltage Disconnect : 16V Over-Voltage Reconnect: 15V
Low Voltage Disconnect: 11.1V Low Voltage Reconnect: 12.6V
Under Voltage Warning: 12V Under Voltage Recover: 12.2V
Charging Limit Voltage: ≤15V Equalization Voltage: Sealed :14.6V; Flooded: 14.8V; Gel: NO
Boost Voltage: Sealed: 14.4V ; Flooded:14.6V; Gel: 14.2V Float Voltage: 13.8V
Equalize Duration: 120 min Boost Duration: 120 min
Temperature Compensation: -3mV/°C/2V Working Temperature: -20°F - 113°F
Storage Temperature: -31°F - 176°F Max Gauge Size: Up to 4AWG
Weight: 0.65 lbs Dimensions: 6.45 x 4.31 x 1.76 inches
Enclosure: IP2
SC-1210LD Solar Charge Controller
Features and Benefits:
- Handles up to 30A Amps of Array Current or up to 450 Watts of solar power
- Protects battery from overcharge and discharge
- Maintains 12V batteries in a fully charged state
- LED status indicator provides quick reference to Battery and load status (SC models)
- LED digital display shows charging current, loads current and battery voltage (SCD model)
- Temperature compensation
SPECIFICATIONS:
DC INPUT (PV)
MAX. PV VOLTAGE 26V
MAX. PV CURRENT 10A
VOLTAGE ACROSS PV & BATTERY < 0.15V
DC OUTPUT (BATTERY)
BATTERY RATING 12V
BATTERY TYPE Sealed/Flooded
MAX. CHARGE CURRENT 10A
CHARGE VOLTAGE RANGE 14.2 - 14.6V
FLOAT VOLTAGE RANGE 13.4 - 13.8V
PARASITIC CURRENT <10mA
DC OUTPUT (LOAD)
LOAD CURRENT (CONTINUOUS) 10A
PROTECTION
PV REVERSE POLARITY Protected
BATTERY OVERCHARGE Yes
LOAD OVER-DISCHARGE VOLTAGE < 11.5V
LOAD RECONNECTED VOLTAGE 12.6V
ENCLOSURE
INPUT/OUTPUT CONNECTION Heavy duty terminals
WEIGHT 5.3 lbs
DIMENSION 11.6 x 8.1 x 3.4''
SC-1220LD Solar Charge Controller
DC INPUT (PV)
MAX. PV VOLTAGE 26V
MAX. PV CURRENT 10A
VOLTAGE ACROSS PV & BATTERY < 0.15V
DC OUTPUT (BATTERY)
BATTERY RATING 12V
BATTERY TYPE Sealed/Flooded
MAX. CHARGE CURRENT 10A
CHARGE VOLTAGE RANGE 14.2 - 14.6V
FLOAT VOLTAGE RANGE 13.4 - 13.8V
PARASITIC CURRENT <10mA
DC OUTPUT (LOAD)
LOAD CURRENT (CONTINUOUS) 10A
PROTECTION
PV REVERSE POLARITY Protected
BATTERY OVERCHARGE Yes
LOAD OVER-DISCHARGE VOLTAGE < 11.5V
LOAD RECONNECTED VOLTAGE 12.6V
ENCLOSURE
INPUT/OUTPUT CONNECTION Heavy duty terminals
WEIGHT 5.3 lbs
DIMENSION 11.6 x 8.1 x 3.4''
SC-1220LD Solar Charge Controller
SPECIFICATIONS
DC INPUT (PV)
MAX. PV VOLTAGE 26V
MAX. PV CURRENT 20A
VOLTAGE ACROSS PV & BATTERY < 0.15V
DC OUTPUT (BATTERY)
BATTERY RATING
BATTERY TYPE Sealed/Flooded
MAX. CHARGE CURRENT 20A
CHARGE VOLTAGE RANGE 14.2 - 14.6V
FLOAT VOLTAGE RANGE 13.4 - 13.8V
PARASITIC CURRENT <15mA
DC OUTPUT (LOAD)
LOAD CURRENT (CONTINUOUS) 20A
PROTECTION
PV REVERSE POLARITY Protected
BATTERY OVERCHARGE Yes
LOAD OVER-DISCHARGE VOLTAGE < 11.5V
LOAD RECONNECTED VOLTAGE 12.6V
ENCLOSURE
INPUT/OUTPUT CONNECTION Heavy duty terminals
WEIGHT 5.7 lbs
DIMENSION 11.6 x 8.1 x 3.4''