MPPT Solar Charge Controller

SRNE MPPT 100V input Solar Controller for 12/24V Battery
ML Series adopts common negative design and advanced MPPT control algorithm. The products can track the MPP point fast and accurately in any situation which will improve energy efficiency and obtain the maximum solar energy.

SPECIFICATIONS:

Model ML2420N10 ML2440N10
______________________________________________________________________________________________________________________
Nominal system voltage 12/24VDC auto work
________________________________________________________________________________________________________________________________________
Rated charge current 20A 40A
________________________________________________________________________________________________________________________________________
Rated discharge current 20A 40A
________________________________________________________________________________________________________________________________________
Battery input voltage Range 8-32V ________________________________________________________________________________________________________________________________________ Max. PV open circuit voltage 100V (at minimum operating environment temperature) 92V (at 25℃ environment temperature)
________________________________________________________________________________________________________________________________________ MPP voltage range    VBAT+2V～ 72V
________________________________________________________________________________________________________________________________________
Max. PV input power 260W(12V)       520W(12V)
520W(24V)     1040W(24V)
_______________________________________________________________________________________________________________________________________
Equalize charging voltage   Sealed: 14.6V, Flooded: 14.8V
_______________________________________________________________________________________________________________________________________
Boost charging voltage Gel: 14.2V, Sealed: 14.6V, Flooded: 14.8V
_______________________________________________________________________________________________________________________________________
Float charging voltage 13.8V
_______________________________________________________________________________________________________________________________________
Low voltage reconnect voltage 12.6V
_______________________________________________________________________________________________________________________________________
Low voltage disconnect voltage   11.1V
_______________________________________________________________________________________________________________________________________
Self-consumption ≤20mA/12V; ≤16mA/24V
_______________________________________________________________________________________________________________________________________
Temperature compensation coefficient   -3mV/ ºC/2V(25 ºC)
_______________________________________________________________________________________________________________________________________
Working temperature -25 ºC ～+45 ºC
_______________________________________________________________________________________________________________________________________
Enclosure IP30
_______________________________________________________________________________________________________________________________________
Overall dimension 220x154x52mm    252x180x63mm
_______________________________________________________________________________________________________________________________________
Power terminals     6AWG(16mm2)     6AWG(16mm2)
_______________________________________________________________________________________________________________________________________
Net weight 1.1kg 1.9kg
_______________________________________________________________________________________________________________________________________

RM-5

RM-5 is an optional remote meter to monitor and program solar controller,

SPECIFICATION:
______________________________________________________________________________________________________________________
Self-consumption   Backlight and acoustic alarm on<65mA
  Backlight on<23mA
   Backlight off <15mA
________________________________________________________________________________________________________________________________________
Faceplate dimensions 98×98 mm / 3.86×3.86 in
________________________________________________________________________________________________________________________________________
Frame dimensions   114×114 mm / 4.49×4.49 in
________________________________________________________________________________________________________________________________________
Connector type RJ12
________________________________________________________________________________________________________________________________________
Meter cable   Standard 2m, max .50m
________________________________________________________________________________________________________________________________________
Meter weight   0.190 Kg
________________________________________________________________________________________________________________________________________
Ambient Temperature   -20℃~+70℃/-4℉~158℉
________________________________________________________________________________________________________________________________________

Renogy 20Amp Commander MPPT Solar Charge Controller with MT-50

This charge controller is compatible with sealed lead-acid, flooded, and gel batteries (all deep cycle). The Commander keeps your batteries from becoming over-charged or over-discharged, increasing the longevity of your batteries. This high tech controller features Multiphase Synchronous Rectification and Maximum Power Point Tracking technologies, which increases charging efficiency and improves system performance.

SPECIFICATIONS:
Nominal System Voltage: 12V/24V Auto recognition Max. Solar Input Power: 260W (12V), 520W (24V)
Rated Battery Current: 20A Rated Load Current: 20A
Max. Solar Input Voltage: 150VDC Self-consumption: ≤27mA (24V)
Maximum Battery Voltage: 32V Temp. Compensation: -5mV/°C/2V (default)
Communication: RSJ45 Weight: 3.3 Lbs
Dimensions: 8.52 x 5.61 x 2.20 inches Mounting Oval: 0.30 x 0.18 inches
Max. Terminal: 10mm2, 8 AWG Max. PV Input Short Current: 25A

Renogy 40Amp Commander MPPT Solar Charge Controller with MT-50

Take command of your off-grid solar power system with this new and improved 40A MPPT charge controller. Unlike a basic PWM Controller, this charge controller is compatible with sealed lead-acid, flooded, and gel batteries (all deep cycle). This controller keeps the batteries from becoming over-charged or discharged, increasing the longevity of your batteries. This high tech controller features Multiphase Synchronous Rectification and Maximum Power Point Tracking technologies, which increases charging efficiency and improves system performance. And with the included MT-50 Tracer Meter you will have full control over your controller. Take your power system up a notch with the 40A Commander Charge Controller.

SPECIFICATIONS:
Nominal System Voltage: 12V/24V Auto recognition Max. Solar Input Power: 520W (12V), 1040W (24V)
Rated Battery Current: 40A Rated Load Current: 20A
Max. Solar Input Voltage: 150VDC Self-consumption: ≤27mA (24V)
Maximum Battery Voltage: 32V Temp. Compensation: -5mV/°C/2V (default)
Communication: RSJ45 Weight: 6.39 Lbs
Dimensions: 11.90 x 7.19 x 2.50 inches Mounting Oval: 0.30 x 0.18 inches
Max. Terminal: 25mm2, 4 AWG Max. PV Input Short Current: 50A

Renogy 60 Amp Commander MPPT Solar Charge Controller with MT-50

Take command of your off-grid solar power system with this new and improved 60A MPPT charge controller. Unlike a basic PWM Controller, this charge controller is compatible with sealed lead-acid, flooded, and gel batteries (all deep cycle). This controller keeps the batteries from becoming over-charged or over-discharged, increasing the longevity of your batteries. This high tech controller features Multiphase Synchronous Rectification and Maximum Power Point Tracking technologies, which increase charging efficiency and improves system performance. Take your power system up a notch with the 60A Commander Charge Controller.

SPECIFICATIONS:
Nominal System Voltage: 12v/24v/36v/48v/ Auto Recognition Max.Solar Input Power: 800W (12V), 1600W (24V), 2400W (36V), 3200W (48V)
Rated Battery Current: 60A Grounding: Negative
Max. Solar Input Voltage: 150VDC Self-consumption:1.4W to 2.2W
Max. Input Short Current: 75A Max. Input Short Current: 8-72V
Communication: RS485 Cable Weight: 12.1 Lbs
Dimensions: 17.7in x 8.2in x 4.2in Mounting: 16.9in x 7.1in
Max. Terminal: 35mm2

Magnun PT-100 MPPT Charge Controller

The PT-100 is a Maximum Power Point Tracker (MPPT) charge controller designed to harvest the maximum available energy from the PV array and deliver it to the batteries.
The PT-100’s MPPT algorithm finds the maximum power point of the array and operates at this point while regulating the output current and battery voltage to fully charge the battery.

SPECIFICATIONS:

Maximum Power Point Tracking technology for increased PV power output efficiency.
Multi-state Charging:
Maximizes system performance and improves battery life.
Optimal Battery Charging:
Maximizes system performance and improves battery life.

Voltage Options: Compatible with 12, 24, or 48V battery systems with automatic detection of system voltage.
GFDI: Integrated PV Ground- Fault Detection and Interruption/ Indication, with pre-fault leakage/ diagnostic metering.
Extensive Electronic Protection: Over-temperature protection, power derating when temperature is high, PV short circuit and high PV input shutdown, output overcurrent protection and night-time back-feed (reverse current) protection.
Support a Large PV Array: A single controller supports a large PV array up to 6600W.
High Efficiency: The PT-100 provides higher than 99% conversion efficiency and uses less than two watts of power in nighttime mode.
Includes: LED Indicators and Screen
AFCI: An integrated PV Arc-Fault Circuit Interrupter detects, indicates, and extinguishes series arcs. The AFCI is designed to meet the new National Electric Code (NEC) Article 690.11 requirements.
Convenient Installation: Run all of the wiring to the unique, remain-inplace wiring box with ease prior to installing the full PT-100 unit.
On-site Updates: The PT-100’s software can be updated on site.
Easy MP and MMP integration: The PT-100 is designed to work with a Magnum Panel (MP) or Mini- Magnum Panel (MMP). It provides room and access to PV and battery disconnect breakers.
Part Number: PT-100
Product Weight: 2